May 2011
Start of a
development and a production of a lacquers for coil-coating
technologies. December 2010
Successful re-certification of system of quality CSN EN
ISO 9001:2009. November 2010
Reconstruction of head-office building is
completed:
September
2010
Adjustment of some TDS. Running addition and updating of
sealing curves. August 2010
Add of new heatsealing lacquers.
Especially lacquer withou PVC content - 46, 86 and 87. Also lacquer 45. All
these lacquers are in testing and development process. Overlacquer 430. Revision
of TDS and MSDS. Change of phone numbers - see contacts. June
2010
We
changed registered place of our company!
VIKTOR trade, s.r.o.
U Jatek 1551
59231 Nove Mesto na
Morave May
2010
We move our office to new
address - U Jatek 1551, Nove Mesto na Morave. It is also our new correspondence
address. March 2010
Revision
of all technical sheets and all MSDS. See "Poduction". MSDS according to
REACH. January 2010
Successful re-certification of system of quality ISO 9001
Sept., Oct. 09
Executing of internal audits and preparing for re-certification
ISO 9001:2001 August 09
Equipment
of laboratory with FTIR spectrometer Nicolet iS10, sealing
equipment RDM and equipment for strength
measurement Zwick/Roell. Expansion of technology with a 7,5
m3 mixing machine. July 09
Obtain of a grant from EU funds - for support of development
and innovation. Financial resources have been used especially for
laboratory equipment and for expansion of production capacity. From Oct.
08
Complete reconstruction of production area at
the cost of 400000 EUR. Storage space, production space, laboratory,
manipulation flats, etc. October 08
Changing of MSDS of lacquers 83, 84, 85, 88 and 95. R - phrases
only. September
08
Start of building of
production zone. July 08
Alignment to
the EU subsidy programme - innovation to upgrade laboratory
equipment. May 08
Addition of flash points to MSDS. May
08
Correction of lacquer
85 (viscosity) and upgrade of the document "Aggregate table of
production". April 08
Revision
of all MSDS (safety) sheets (still on the basis of old legislation).
Addition of properties of lacquer 374. March
08
Revision of all technical
sheets. Some physical parameters of lacquers were set up according to real
values.
Revision of sealing abilities of all universal heat sealing
lacquers.
See your changes please. Best in "Agregate table of
production".
Start of revision and remake of safety sheets on the basis
of the REACH regulation. January 08
Added universal sealing lacquer "84" and barrier lacquer for
molten cheese packaging "470". Also lacquers "471" and
"430"were added, but they are in the test phase for now. November
07
Changing of properties and sealing
curve of lacquer "88" November 07
Successful
re-certification of system of quality ISO 9001 October
07
Added sealing curves of lacquers
41, 83, 85, 88 and aggregate table of production September
07
Revision of technical and safety
sheets (see production) July 07
Improvement of TH-LACQUER VIKTOR 70
